Applicable to Article X - Chapter 7 FROM 107-01: “Caliper” of a tree is the diameter of a tree trunk measured 4 feet, 6 inches from the ground. If a tree splits into multiple trunks below this height, the trunk is measured at its narrowest point beneath the split. For trees with a diameter of less than three inches measured 4 feet, 6 inches from the ground, the caliper shall be measured 12 inches from the ground.
ZR GLOSSARY
caliper (of a tree)
§12-10 Definitions
caliper (of a tree)
caliper (of a tree) is a defined term in the New York City Zoning Resolution glossary (§12-10). It is referenced in 0 ZR sections. Last amended November 2, 2023.
Quick Facts
- Definition source
- §12-10
- Sections using term
- 0
- Last amended
- November 2, 2023
What does “caliper (of a tree)” mean?
Frequently Asked
What does "caliper (of a tree)" mean in NYC zoning?
"caliper (of a tree)" is a term defined in §12-10 of the New York City Zoning Resolution glossary. Applicable to Article X - Chapter 7 FROM 107-01: “Caliper” of a tree is the diameter of a tree trunk measured 4 feet, 6 inches from the ground. If a tree splits into multiple trunks below this height, the trunk is measured at its narrowest point beneath the split. For trees with
Where is "caliper (of a tree)" used in the NYC Zoning Resolution?
The term "caliper (of a tree)" is referenced in 0 sections of the NYC Zoning Resolution. Every section that uses this term must be read in light of the §12-10 definition.
Is "caliper (of a tree)" an official NYC zoning term?
Yes. "caliper (of a tree)" is an officially-defined term in §12-10 of the NYC Zoning Resolution maintained by the NYC Department of City Planning. The authoritative source is zr.planning.nyc.gov.
Need help interpreting “caliper (of a tree)”?
Ask MuniMind for plain-language explanations and case examples.